WE ARE ALL OVER THE WORLD - Finished Fabric Inspection Machines

• 600 mm.diameter fabric rol lor plated fabric inspecting without tension.
• 40° inclined inspection screen illuminated by 2 different points.
• PLC controlled command system.
• 0-60 m/ min.speed control without step.
• Inverter controlled edge control system.
• Meter measurement with %0.5 sensitivity.
• Standard machine designed for inspecting fabric width 1800-2400-3000 mm.
• Fabric opening system by spiral wire awinded cylinders.
• Conveyor band system supplied to move

KM5-B40 • 450 mm.diameter fabric roll or plaited inspecting withhout tension.
• 55° inclined inspection screen illuminated by 2 different points.
• PLC controlled command system.
• 0-60m/min.speed control without system.
• Meter measurement with %0.5 sensivity.
• Standard machine designed for inspecting fabric width 1800-2400.
• Special weight system for measuring the weight of roll.(Optional)
• Computer Aided Fabric Inspection System and Bar code Labeling.(Optional)

KM4B
• 450 mm.diameter fabric rol lor plated fabric inspecting and rolling without tension.
• 55° inclined inspection screen illuminated by 2 different points.
• PLC controlled command system.
• 0-60 m/min.speed control without step.
• Inverter controlled edge control system.
• Meter measurement with %0.5 sensitivity.
• Standard machine designed for inspecting fabric width 1800-2400-3000 mm.
• Fabric opening system by spiral wire winded clyinders.
• Special weight system for measuring the

KM5

• 450 mm.diameter fabric rol lor plated fabric inspecting and rolling without tension.
• 60° inclined inspection screen illuminited by 2 defferent point.
• PLC controlled command system.
• 0-60 m/min.speed control without step.
• Inverter controlled edge control system.
• Meter measurement with %0.5 sensitivity.
• Standard machine designed for inspecting fabric width 1800-2400-3000 mm.
• Fabric opening system by spiral wire winded cylinders.
• Special weight system for measuring the

KMS-ER

• 450 mm.diameter fabric rol lor plated fabric inspecting and rolling without tension.
• Batch opening system by pneumatic pressure adjusted (±) cylinder.
• 55° inclined inspection screen illuminated by 2 different points.
• PLC controlled command system.
• 0-60 m/min.speed control without step.
• Inverter controlled edge control system.
• Meter measurement with %0.5 sensitivity.
• Standart machine designed for inspecting fabric width 1800-2400-3000 mm.
• Fabric opening system by spiral wire winded

KM5-2005 P

• 600 mm. Diameter fabric rol lor plated fabric inspecting without tension.
• Fabric opening on actuated cylinders.
• 45° inclined inspection screen illumited by 2 different points.
• PLC controlled command system.
• 0-60 m/min. speed control without step.
• Inverter controlled edge control system.
• Meter measurement with %0.5 sensitivity.
• Standard machine designed for inspecting fabric width 1800-2400-3000 mm.
• Protecting the inspection area from exterior lights covered with special cabin and violet

KM6-B

• Plated or Batch Fabric inspecting without tension.
• Batch opening by electic motor driven special feeding unit.
• 45° inclined inspection screen illuminated by 2 different points.
• PLC controlled command system.
• 0-60 m/min speed control without step.
• Inverter controlled edge control system.
• Meter measurement with %0.5 sensitivity.
• Fabric opening system by spiral wire winded cylinders.
• Standard machine designed for inspecting

KM6-2000 D • 600 mm.diameter fabric rol lor plated fabric inspecting without tension.
• 15°- 80° inclined penumatically actuated inspection screen illuminated by 2 different points.
• 3-60 m/min.speed control without step.
• Special swing system for plaiting to trolley.
• Inverter controlled edge control system.
• Meter measurement with %0.5 sensitivity.
• Standard machine designed for inspecting fabric width 1800-2400 mm.
• Special weight system for measuring the weight of roll.(Optional)

KM9-S

• 600 mm.diameter fabric rol lor plated fabric inspecting without tension.
• 55° inclined screen illuminated by 2 different points.
• PLC controlled command system.
• 0-60 m/min.speed control without step.
• Inverter controlled edge control system.
• Meter measurement with %0.5 sensitivity.
• Standard machine designed for inspecting fabric width 1800-2400-3000 mm.
• Fabric opening system by spiral wire winded cylinders.
• Conveyor band system supplied to move

KM5-S-B40

• 600 mm.diameter fabric rol lor batch fabric open by pulling and inspecting.
• 30° - 60° inclined manuel actuated inspection screen illuminated by 2 different points.
• 3-60 m/min.speed control without step.
• Inverter controlled edge control system.
• Meter measurement with %0.3 sensitivity.
• Standard machýne designed for inspecting fabric width 1800-2400 mm.
• Special weight system for measuring the weight of roll.(Optional.)
• Electric motor driven manuel or automatic

KM7-2005