WE ARE ALL OVER THE WORLD - Raw Fabric Inspection Machines

• Inspecting the raw fabric ‘with lycra’ winded on weawing beam.
• 55° inclined inspection screen is covered with special cabin,illuminated by 4 different points.
• Pneumatic tension controoled synchronization system.
• PLC controlled command system.
• 0-60m/min.speed control without step.
• Edge controlled system is hydraulic controlled.
• Meter measurement with %0.5 sensitivity.
• Standard machine designed for inspecting
KM

KM-6 2005 R

• Plated and roll fabric inspecting and made big roll (batching)
• 45° inclined inspection screen illuminated by 2 different points.
• Pneumatic tension controlled synchronization system.
• PLC controlled command system.
• 0-60m/min. Speed control without step.
• Straightener unýt provides centering fabric to machine.
• Meter measurement with %0.5 sensitivity.
• Standard machine designed for inspecting fabric width 1800-2400 mm.

KM6 -2005 DS/D20 • 450 mm.diameter raw fabric rol lor plated fabric inspecting and rolling without tension.
• 55° inclined inspection screen is covered with special cabin,illuminated by 3 different points.
• PLC controlled edge controlled command system.
• Standard machine designed for inspecting fabric width 2400-3000 mm.
• Curled fabric edge,open by compressed air blower system.
• Fabric opening system by spiral wire winded cylinders
KM5